Thermopaste AURATHERM against mold and cold walls!

Simply apply Auratherm to the cold surface from the inside using a paint roller or brush.

1 liter of thermal paste is sufficient for 3 – 4 m²

Thermopaste Auratherm offers an effective solution for improving the indoor climate and increasing thermal comfort.

Comfort through insulation and reflection of heat in the room. No more mold!

Easy to process.

What makes Thermopaste Auratherm so special?

Based on heat reflection, the ceramic coating creates radiant heat in living rooms, stairwells, commercial buildings, basements, garages and all other poorly insulated rooms. The thermal coating thus effectively reduces the negative effects of the so-called “heating roll” (the rising of warm air from the radiator and the slow cooling of the same on the opposite wall). Thanks to the high number of thermally insulating hollow glass microspheres, the heat is stored by the coated walls and radiated back into the interior. Thanks to these properties, no moisture forms on the surfaces and mold growth is permanently prevented.

The product features

✅ Energy-saving climate coating (insulation and color in one)
✅ Thermally insulating thanks to micro hollow glass spheres
✅ Energy saving due to strong reflection of heat radiation
✅ Saves energy and heating costs by optimizing the heating effect
✅ Permanently dehumidifying – resulting in dry walls that insulate well
Greatly reduces the formation of mold
✅ Improves the indoor climate
Breathable / open to diffusion
Environmentally friendly

How is Auratherm thermopaste processed?

The surface must be dry, clean, sound and free of mold. Wallpaper must be removed before application. Pre-treat highly absorbent walls with a deep primer. Stir the Auratherm lump-free in the container before use. Apply with a nylon paint roller max. 12 mm pile or a brush. Two coats are required for optimum thermal reaction. The minimum application temperature of the surface should be at least 8°C. The drying time for the first coat is approx. 3 – 5 hours at an ambient temperature of 20°C and a humidity of 65%. Cover or remove open foodstuffs during processing and the drying phase. Auratherm thermal protection paste can be reworked with other paints without any problems.